Including VAT

Gone are the days when a professional chimney sweep was needed for mechanical cleaning of chimneys.
Now you can clean your home chimney yourself, even without going through an initial training course.
A chimney sweep is not necessary. In addition, you can do it and it is not difficult - without spending a lot of time and without climbing on the roof!

Brush width: 40 cm

Usage:
Using the Hans chimney cleaning brush is very easy.
Thanks to its special flexibility, it is able to enter the narrowest gaps, which makes it possible to clean the flue from the heating chamber.
And you really don't have to climb on the roof!

Sit next to your boiler and follow ten simple steps:

Step one. Make sure the stove is not running, but there is no wood or other flammable materials in the firebox.
Step two. Remove the valve (if any) at the chimney entrance and other removable parts.
Step three. Attach one of the handle parts to the brush.
Step four. Holding the brush by the handle, insert it into the flue inlet.
Step five. By moving the brush in different directions, clean the places you can reach.
Step six. Attach the next section to the brush handle and continue cleaning above. Add sections as needed until the entire flue is cleaned.
Step seven. When cleaning is complete, pull the brush out of the flue, gradually disconnecting the handle sections.
Step eight. Collect soot in the firebox.
Step nine. Return all disconnected parts to their places.
Step ten. Wash the handle and brush with warm water and store until the next time you clean.

Good luck! May warmth and comfort never leave your home!

The set includes only a brush! HANSA cleaning brush sections can be ordered separately.

 Based on the data you provide in the Billing Information, you will be sent a revised invoice

If you have questions, feel free to write or call info@e-granulas.com, 29223531